Detailed description
The SL-N1010 emits on three sides instead of one. Its 10 x 10 mm square cross-section diffuses over 210 degrees, which eliminates dark areas as soon as the neon is seen at an angle or housed in an internal corner.
Use cases
- Recesses, window reveals and internal corners where frontal emission would leave a shadow.
- Retail fit-out: gondolas, counter edges, frames.
- Furniture and décor seen from several angles of circulation.
- Signs and lettering intended to be read at three-quarter view.
- Sheltered outdoor areas and coastal zones, thanks to salt resistance.
Technical highlights
- Emission on three sides, 210 degrees: light comes out of the top and both sides. The visual result is a fully lit edge, without the dark outline left by a single-sided neon seen from the side.
- 10 x 10 mm cross-section: still compact enough for integration, but with a larger emitting surface than mini formats.
- 829 lm/m: a level that goes beyond a simple decorative effect and genuinely contributes to the illuminance of a nearby area.
- Vertical bending: designed to bend in the plane of its main emission, and therefore to follow outlines in elevation.
- IP67: tight against dust and temporary immersion. The product tolerates washing and splashes, which extends its use to damp rooms and covered outdoor areas.
- Environmental silicone resistant to salt and UV: no accelerated degradation by the sea or under sun exposure.
- CRI above 90: faithful rendering of brand colours and materials, a sensitive point in retail.
- 3-year warranty.
The main decision criterion is the viewing angle. If the luminaire is only seen along one axis, a single-sided neon is enough and will cost less. As soon as it is seen from several sides, or housed in a recess, emission on three sides avoids breaks in visual continuity. Send us the detail sections so that we can check the chosen orientation.
