Detailed description
The REXFLOG 30W projects a logo or an image onto a surface, on the floor or on a wall. It is a signage and visual communication tool: it replaces a physical marking with a luminous image that can be moved, reoriented or switched off without leaving any trace on the surfaces.
Applications
- Shop windows and entrances, projecting the brand onto the ground in front of the shop.
- Restaurants, hotels and reception halls, to mark an identity without work on the floors.
- Cinemas, performance venues and event spaces.
- Trade fairs and stands, where the visual must be set up and taken down quickly.
- Temporary directional signage in indoor circulation areas.
Technical highlights
- 30 W for 2700 lm with CREE LEDs: it is the luminous density obtained on the surface that determines the legibility of the image, especially on a light-coloured or already lit floor.
- 4-layer lens: the optical stack serves the sharpness of outlines, the usual weakness of entry-level image projectors.
- Distance from 1 to 15 m in dark conditions, from 1 to 8 m in lit conditions: it is the second value that must be used for a shop open during the day.
- 15°, 20° or 25° angles: at the same distance, a wider angle enlarges the image but spreads the same lumens over a larger area, making it look paler. The angle is always chosen together with the available throw distance.
- Motorised rotation of the engraved image, for a continuously animated image.
- IP20: strictly indoor fitting, with no protection against water, to be kept away from façades and exposed areas.
- Aluminium alloy housing, dimensions 190 x 210 x 88 mm.
Before ordering, measure the distance between the fixing point and the projection surface, then the desired image size: these two values mechanically impose the angle to choose. Then check the ambient illuminance of the target area, because it is this, more than the power of the projector, that limits the contrast perceived by passers-by. For advice on a specific case, contact us with the dimensions of your premises.
