LINATEX-160 ATEX Linear Luminaire

The LINATEX-160 luminaire is an explosion-proof linear batten, that is, an ATEX luminaire certified for explosive atmospheres, intended for continuous general lighting of hazardous premises. Its efficacy of 160 lm/W makes it one of the most economical ATEX solutions in its category, for areas where humidity, dust or corrosive vapours rule out a conventional luminaire.

Applications

• Refineries, petrochemical units and processing areas.
• Humid, dusty or corrosive premises in the chemical industries.
• Tunnels and technical galleries subject to extreme temperatures.
• Walkways, gangways and circulation routes on classified sites.

Technical highlights

• ATEX II 2 G Ex eb mb IIC T4 Gb / II 2 D T95°C: approved for zones 1 and 21, where an explosive gas or dust atmosphere can occur in normal operation.
• 160 lm/W, from 4,800 lm at 30 W to 12,800 lm at 80 W: constant efficacy across the range; sizing is done directly on the required flux.
• IP66: fully dust-tight and resistant to powerful water jets, essential in humid or washed-down environments.
• 25-100 % sensor control: the batten lowers its flux when no one is present and restores it on detection, reducing consumption in little-used areas.
• 90-minute emergency battery: maintains safety lighting in the event of a power cut, useful on evacuation routes.
• 50,000 h service life: limits maintenance interventions, which are costly in ATEX zones where every access is supervised.

Connectable end to end, the LINATEX-160 forms continuous lines above aisles and workstations.